ASTREON / NEW PRODUCT
ASTREON Sensbox
Eight channels. One portable measurement system.
Bring surface temperature, humidity, air temperature, duct air velocity and filter differential pressure into one portable acquisition and recording case. Sensbox is designed around field connection, a visible logger and a matched backup-power path.
03 / CONFIGURATION
Sensor, channel and power mapping.
The channel assignments below follow the video. Live-looking screen values are illustrative, rather than calibration or test results.
Eight measurement channels, with humidity and air temperature sharing one remote probe. Channel numbering follows the supplied demonstration.
| Channel | Measurement | Sensor / signal path |
|---|---|---|
| CH 01 | Supply duct surface temperature | Surface-contact thermocoupleThermocouple mV → type-matched conversion + cold-junction compensation → °C |
| CH 02 | Return duct surface temperature | Surface-contact thermocoupleThermocouple mV → type-matched conversion + cold-junction compensation → °C |
| CH 03 | Chilled-water supply surface temperature | Surface-contact thermocoupleThermocouple mV → type-matched conversion + cold-junction compensation → °C |
| CH 04 | Chilled-water return surface temperature | Surface-contact thermocoupleThermocouple mV → type-matched conversion + cold-junction compensation → °C |
| CH 05 | Relative humidity | Shared remote humidity / air-temperature probeInternal transmitter → independent 4–20 mA humidity signal → %RH |
| CH 06 | Air temperature | Same remote probe as channel 05Internal transmitter → independent 4–20 mA temperature signal → °C |
| CH 07 | Duct air velocity | Cable-connected thermal airspeed probeInternal transmitter → 4–20 mA → m/s |
| CH 08 | Filter differential pressure | Differential-pressure transmitter with HIGH / LOW tubesHIGH upstream − LOW downstream → internal transmitter → 4–20 mA → Pa |
Battery & backup power
- Battery shown
- Bioenno Power BLF-2410A
- Proposed battery configuration
- 24 V, 10 Ah LiFePO₄ compact protected pack
- Power path
- Matched charger and DC UPS path
- Configuration check
- Final load and enclosure to be verified, as stated in the demonstration
The video identifies this battery as a proposed configuration. Final battery, charger, DC UPS compatibility and load must be confirmed for the selected build; a verified operating runtime is not specified.
ASTREON / PROJECT ENQUIRY
Build your Sensbox measurement plan.
Tell us about your process, site conditions and required outcome. We’ll help you define the next step.